Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsiveness of gas cooktops, but still requires an oven to bake in? Discover a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are preferred by many home chefs who have years of experience in the kitchen due to their superior temperature control. They also permit them to use advanced cooking techniques like charcoaling. These stoves are costly though, especially in the event that you require an additional gas hook-up as well as an electrician for installation.
What is a 13amp outlet?
If you have a dual-fuel range cooker (also called a gas and an electric oven), you will need an electrical outlet of 13 amps. The plug should also be hard-wired by a certified electrician to the cooker ring.
This ensures that the current passing through the plug is secure and not excessive, which could result in an electrical fire danger. The plug is equipped with an electrical fuse that regulates the current. The fuse goes out as soon as the current flows through it beyond its capacity, which protects the appliance from an overload of electricity.
dual-fuel range style cookers is rated at 13 amps, as indicated on the top of the plug. This is the maximum amount of current that the plug could carry without damaging the appliance or causing heat to the socket. It is important that when replacing fuses, you always use the same amps as the original. If you replace the fuse with one that has the different ratings, you risk overheating the socket and possibly putting you and others at high risk.
A 13 amp fuse is likely to be a type of ceramic, which is very durable and is able to withstand extreme temperatures generated by a range cooker. Ceramic elements are also resistant to fire and is therefore a better option over other types.
There are many ways to install a 13 amp plug. It may be wired to an existing live socket. the flex is connected to this by a screw or plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug is firmly pushed into place.
Before connecting the wires, you may need to remove the wiring diagram printed on cardboard which is placed on top of the pins on some plugs. The wires should be cut to the correct length, because when they are too long, they may be crushed when the plug covers are replaced. The earth wire should be the longest to connect it before the neutral and line pins.
How do I connect a 13amp plug?
The majority of dual fuel range cookers sold in UK are wired with a 13 amp plug. This is vital because ovens can draw large amounts of current, while the standard plug sockets have a rating of 10 amps.
In general, new appliances should be fitted with a plug at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug connected and this is the problem.
The first thing to do when connecting a cooktop to an existing plug socket is to make sure that the rating of the fuse in the fuse box matches that of the plug. This is very important because a fuse that is not properly sized could be dangerous.
It is also advisable to make sure that the fuse is installed in the cartridge and there isn't any excessive movement within it. Next up is to prepare the flex that is to be used. Take off More Support and reveal the three conductors that are insulated. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors that are insulated. This nick must be large enough to allow for the sheathing and cable to separate as the sheathing is pulled back. Finally cut off the excess sheathing leaving about 40mm over the flex end.
The flex is positioned over the plug with the earth terminal at the top and neutral and live terminals at the bottom. The sheathing on each pin is removed using coloured conductors as a guide. The internal cable is then fixed into the terminal with the help of the cord grip. If the plug has an screw-type clamp for cords loosen it, and then pull back the insulation to expose the copper conductors. Finally, connect each insulated conductor to the correct terminal (starting with the earth first, then neutral and finally the live) by using the channel they run through in the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for the 13amp plug is 3kw at 230volts. This is a significant amount of power, however the standard fuse that is fitted in a UK plugtop will not fail until the cable has reached to a dangerous temperature. A defective plug or socket could cause fire, therefore it is important to be aware of the amount of power you use particularly in the kitchen.
The fuse in plugtops is ceramic, about 25mm in length and 240V mains rated. The fuses will bear a BS Kitemark or similar mark on their side, and they'll contain sand. There are glass or plastic alternatives, however they should never be used with a live plug, except if you don't want to cause a fire and be electrocuted!
Most dual fuel range cookers sold in the UK need to be hard-wired and cannot be plugged directly into the wall socket. They are usually connected via an exclusive cooker circuit, which is suitable only for appliances that can handle up to 20 amps.
You can check the ring circuit of your home by checking the fuse box or by asking a local electrician. They should be able to tell you if the sockets in your home are connected to the same ring or separate and if there is a separate circuit for your oven.
When you're looking to buy a brand new dual fuel range cooker the size of your kitchen is an important aspect to take into consideration. Luckily, we have a large selection of cookers to suit any space, including small 50-60cm dual fuel models as well as huge 90cm + double oven models from leading brands like Rangemaster and StovesAreUs.
We also offer a wide variety of multifunction electric and gas cookers. These versatile machines let you cook a variety of meals including casseroles, pasta, and curries.
Explore our full range of Cookers in Currys on our website or visit us in store for a look. We offer free delivery and home installation on selected range cookers and also flexible payment options. If you have any queries or concerns, our staff are on hand to help by sending us an email or give us a call. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion about what the maximum current draw of a cooker switch is. The reality is that the majority of cookers aren't designed to plug into a standard socket, but instead are hard wired and connected to a specific oven ring circuit. This is because they will often draw more than 20 amps of power when the electric oven and gas hob are in use.
There aren't any dual fuel range cookers that can be installed in a standard socket as this would pose an enormous fire risk and violate electrical regulations. A licensed electrician should install new electrics in the kitchen to the cooker. They will also ensure that the total load of the oven and hob does not exceed the circuit's supply capacity.
The benefits of a dual fuel cooker are the receptive cooking power of a gas stove with the precision of an electric oven. This is the reason they are popular among chefs and home cooks alike. If you are looking to experiment with different cooking techniques, such as searing and charcoaling, a dual fuel range cooker is the ideal option.
When purchasing a new range cooktop, you need to take into consideration a variety of factors that include size, performance and price. Additionally, you'll be required to ensure that your house has a suitable gas hook-up for the appliance. If you aren't sure, it is best to book an appointment with a Gas Safe engineer to inspect your home prior to installing.
Currys' dual fuel range cookers come in a variety of models to meet all budgets. From affordable models from Indesit and Zanussi, to our own Essentials collection. If you're looking for something bit more sophisticated we also carry a wide selection of premium JennAir ranges, featuring several new features.
It is crucial to read the owner's guide before purchasing a dual-fuel range cooker. This will give you specific information regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber may be required to connect it for you. Depending on your home you'll also need to make sure that you have a dedicated cooker ring circuit installed and signed off by a licensed electrician.